Binders

Sport Pitch Shock Pad Binders

Non hazardous, slow curing, flexible, solvent free resin for bonding rubber crumb particles. Designed for machine application in the production of sports pitch shock pads.

Enquire about this product

Key Uses

3G & 4G Sports Pitches
MUGA's

Benefits

Solvent Free
Slow curing for machine application
Excellent Track Record
Ancillary products available e.g. primers, accelerators and resealers

Technical Specification

Product Specification

Product: Leeson Rubber Crumb Binder. Thickness: Determined by application requirements.

Substrate Requirements

System typically installed on asphalt. Detailed installation instructions are available on request.

Products Included in This System

Base LayerTypically 4-6mm SBR

BinderPU487210-12%

Technical Information

The figures below are typical properties achieved in laboratory tests at 21°C and 55% Relative Humidity.

Temperature Resistance: Resistant to temperatures of up to 70°C for long periods.
Chemical Resistance: To various acids, diesel and petrol as well as strong bases.
Speed of Cure: 19°C: 18-36 hours.
Testing to BS7188:1998: BS7188:1998 Shock Pad requirements: tensile strength ≥ 0.1 MPa and elongation at break ≥ 25%. PU4872 on 1-4mm SBR: Tensile Strength 0.54 N/mm², Elongation @ Break 48%.
Aftercare – Cleaning and Maintenance: The surface should be swept regularly to keep it free of organic material such as leaves.
Environmental Impact: The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning. Environmental and health considerations are controlled during manufacture of the products by Leeson Polyurethanes staff.
Further Information: To ensure you are specifying a fit for purpose surface for your project please consult our Area Sales Manager for your area or contact us on lpusales@icpgroup.com.

Installation Service

The installation should be carried out by an experienced contractor, details of contractors in your area can be obtained by contacting the company.

UV Discolouration

Please note that rubber crumb binder products are based on MDI polyurethane technology which is subject to colour change under exposure to UV. The strength of the system is not affected. We have in-house UV testing facilities and can test customer's rubber/binder combinations. We strongly urge our customers to use this service prior to using a new rubber.

Important Note

Leeson Polyurethane's products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request.